Product Description
RFID cabinet lock with knob. This lock is ABS plastic. Knob is matte chrome finish. The front of the knob contains the sensor and is where you scan with your user card to operate the lock. The Lock Body is heavy duty zinc alloy. The knob has a 2.5mm port on the bottom side of the knob. This port is used to plug in an external power supply (PS-002, not included) to give the lock power if the batteries die so you can open the lock with your user card. Then change out the batteries. Reprogramming is not necessary when changing out the batteries. Just put new ones in.
Comes with 1 management card, 2 user cards, knob, strike plate and lock itself and instructions, and cable
Please select the cable length you would like. This cable goes from the lock to the sensor (knob). You may want to mount the knob further away from the lock body.
Lock is ABS plastic.
Low frequency, 125 KHZ
Reliable function for 16-25mm panels.
Material: ABS lock housing
Color- Matte Chrome housing with black lock face.
With below accessory:
1. 3 non-programming cards(can be programmed by user.)
2. ABS Striking plate 1 pc
3. Battery cover plate
4. Screws for installment
5. Operation manual is included
6. Steel plate to fix back side
**Battery is not included**
Feature of product:
1. Easy to program- no need for software or PC
2. Can be installed on wooden or steel panels
3. Low voltage notification function when voltage drops to 3.6V
4. Simple to install
5. The front sensor can also be used as handle
6. The latch will retract while the power is below certain voltage.
7. The diameter is 19mm which can replace the regular drawer camlock directly without drilling another hole
Brand: ARMSTRONG
Item code: SDWC-MC507K
RFID Frequency: 125K Hz
Product dimension:
Front knob: dia. 33mm, hole size: dia.19mm
Lock body: 91mm x 58mm x 16.5mm
Color: Matte Chrome
Power: 4.5V ( must use AAA alkaline batteries x 3 pcs)
Board thickness: 16~30mm
Card capacity: 50
Batteries included? No
Batteries required? Yes
