Product Description
Reinforced RFID cabinet lock with knob. Knob is matte chrome finish. The front of the knob contains the sensor and that is where you scan your user card to operate the lock. The Lock Body is heavy duty zinc alloy. The knob has a 2.5mm port on the bottom side of the knob. This port is used to plug in an external power supply (PS-002, not included) to give the lock power if the batteries die so you can open the lock with your user card. Then change out the batteries. The Lock will stay locked when the batteries die completely. There is an audible low battery alarm that will go off when you scan the lock, and the voltage is low. Please change out the batteries when this alarm is heard reprogramming. It is not necessary when changing out the batteries, just put new ones in.
Comes with 1 management card, 2 user cards, knob, strike plate and lock itself and instructions, and cable.
Please select the cable length you would like. This cable goes from the lock to the sensor (knob). You may want to mount the knob further away from the lock body.
Mifare, 13.56 Mhz
Reliable function for 16-25mm wooden panel.
Color- Matte Chrome housing with black lock face.
With below accessory:
1. 3 preprogrammed cards (1 manager card, 2 user cards)
2. ABS Striking plate 1 pc
3. Battery cover plate
4. Screws for installment
5. Operation manual is included
6. Steel plate to fix back side
**Battery is not included**
Feature of product:
1. Easy to program- no need for software or PC
2. Can be installed on wooden or steel panel only
3. Low voltage notification function when voltage drops to 3.6V
4. Simple to install
5. The front sensor can also be used as handle
6. The latch will retract while the power is below certain voltage.
7. The diameter is 19mm which can replace the regular drawer lock directly without drilling another hole
Brand: ARMSTRONG
Item code: SDWC-PS207-M1-G2
RFID Frequency: Mifare, 13.56 Mhz
Lock body: Zinc alloy
Front knob: diameter 1.3in, hole size: diameter 0.75in
Lock body dimensions: 4.7in x 2.3in x 0.75in
Color: Matte Chrome
Power: 4.5V (must use AAA alkaline batteries x 3 pcs)
Board thickness: 0.63in~1.2in
Card capacity: 50
Batteries included? No
Batteries required? Yes
