RFID Digital Lock For Spa Swimming Pool Gym Electronic Cabinet Drawer Lock. Lock works on 125khz frequency.
Comes with 1 RFID card and 2 RFID key fobs.
RFID card is pre-programmed as management card and Key fobs are pre-programmed as user cards.
This lock can only have upto 10 usercards or fobs per lock.
Fits doors up to 0"-1.2" thick
Ideal of cabinets, lockers, cupboards, medical carts, data racks, gun boxes, safes. (no metal)
RFID Keyless Designed for Hidden Installation
15,000 openings from 2 x AA batteries
Public or Private Functions
Product Size:Lock 3.38" x 2.48" x 1.1", Latch 2.05" x 1.89" x 0.63"
Key Type: ID Card, RFID key fob
1.Install the lock
2.Fill the 2 AA batteries(Alkaline or lithium recommended)
3.Install the lock catch
Simple, EASY, DIY. It installs at right angle(door and side). it's perfect for wooden door cabinets.
1). Fill 2xAA 1.5V Batteries in the lock, and you can add RFID Cards.(Managing Card:1pc, Guest Cards,10pcs)
Two modes, you can change by yourself.
One use any cards to open the cabinets(this is perfect to use at home)
Another is use the managing card or two guest card to open the cabinets(this is perfect to use at businesses where you want 2 keys to be used to open the lock.
2). Fix the lock at inside of cabinet. Close it.
And use ID card to touch outside of cabinet, the lock will beep and open the door.(Note that FOBs only can be used for Max 1" thick door, the RFID cards can be used for Max 1.5" thick door)
Install 2 x AA 1.5V Batteries, press the reset button at the backside of the lock body until a long beep.
2.Creating Management Card
After reset the lock, swipe the RFID card / tag, this first card / tag will be configured as Management Card.
3.Select Unlock Mode
After setting the Management Card, you should select the unlock mode.
(1)Press the reset button shortly and release, if you hear one short beep and one long beep, this is for Single Mode.
(2)Press the reset button shortly and release, if you hear two short beep and one long beep, this is for Dual Mode.
4.Add User Card
Swipe the management card, and swipe the new cards which you want to add within the beeps.
Same as reset. Press the reset button at the backside of the lock body until a long beep, all management card and user cards will be invalid. Then you can set new management card.
Low Voltage Alarm: Please use 1.5V AA Batteries (alkaline or Lithium). When you swipe the card to unlock, the alarm will alert (you can hear a long beep) when the battery power is low. You still can swipe card to unlock for max. 50 times. Please replace the batteries promptly.
1x Lock without batteries
1x lock catch
1x ID Card(work at about 1.5" distance Max.)
2x Key Fob, 1" max distance
1x Package of Screws